Precision Measuring Instruments

Product Details:

Electronic Outside Micrometers measure 0-0.25 millimeters (0-1 inches) at a time. They feature an easy-to-read digital (LCD) display that is switchable from inch to metric and can be set to zero at any position.

Product Details:

Dial gauges are used for checking flatness of surfaces; parallelism of bar and rods; and detecting small differences if any in linear measurement of identical objects. A dial gauge is also used for measuring concentricity of round objects. These are available in inches as well as in millimetre.

Product Details:

_{V1P / 12.5 MM / 0.5" DIGITAL DIAL GAUGE (0.001 MM / 0.00005" L.C.) VALUE LINE DIGITAL Plunger DIAL GAUGE Range 12.5mm / 50mm READING 0.01MM/ 0.0005', Large digits, Zero setting, with 0.01/0.0005" display resolution. Preset referance, Manual/auto power off.}

Product Details:

Dial gauges are used for checking flatness of surfaces; parallelism of bar and rods; and detecting small differences if any in linear measurement of identical objects. A dial gauge is also used for measuring concentricity of round objects. These are available in inches as well as in millimetre.

Product Details:

Dial gauges are used for checking flatness of surfaces; parallelism of bar and rods; and detecting small differences if any in linear measurement of identical objects. A dial gauge is also used for measuring concentricity of round objects. These are available in inches as well as in millimetre.

Product Details:

Dial gauges are used for checking flatness of surfaces; parallelism of bar and rods; and detecting small differences if any in linear measurement of identical objects. A dial gauge is also used for measuring concentricity of round objects. These are available in inches as well as in millimetre.

Product Details:

Dial gauges are used for checking flatness of surfaces; parallelism of bar and rods; and detecting small differences if any in linear measurement of identical objects. A dial gauge is also used for measuring concentricity of round objects. These are available in inches as well as in millimetre.

Product Details:

This tool is used to measure a workpiece's flatness of surface, roundness, runout, and so on. The working principle of the dial gauge is dependent on the movement of the spindle. It travels up and down. This movement is then converted to a rotating needle (pointer) scale reading.

Product Details:

A Lever Dial Gauge, commonly known as the Dial Test Indicator, is designed to probe surfaces that cannot be reached with a normal dial gauge. It is useful both for alignment and measurement purposes. A Lever Dial Gauge has a stem, dial face, bezel, pointer and stylus.

Product Details:

Dial gauges are used for checking flatness of surfaces; parallelism of bar and rods; and detecting small differences if any in linear measurement of identical objects. A dial gauge is also used for measuring concentricity of round objects. These are available in inches as well as in millimetre.

Product Details:

Dial gauges are used for checking flatness of surfaces; parallelism of bar and rods; and detecting small differences if any in linear measurement of identical objects. A dial gauge is also used for measuring concentricity of round objects. These are available in inches as well as in millimetre.

Product Details:

These heavy-duty precision dial gauge stand is provided with rapid fine adjustment movement. The serrated column has a knurled thumb nut which permits rapid up and down movement of indicator bracket assembly that acts as a safety device preventing accidental dropping of the Indicator bracket Assembly.

Product Details:

The Dial Gauge with Magnetic Stands is a comparison instrument that ensures high quality, high accuracy, and reliability. Magnetic stands accept all dial indicator and dial test indicators and clamp to iron or steel surfaces with a strong magnetic force.

Additional Information:

• Item Code: D83029000

Product Details:

Features:

• Accurate Inductive measuring system
• Inch / Metric capability
• RS232 output
• Hardened and ground stainless steel plunger and stem
• GAUGE can be set to 0.01 mm / 0.0005 Inch, besides the standard 0.001 mm / 0.00005 Inch
• The Electronic Module is completely sealed against dust and water / coolants / lubricating oils directed towards it from all sides (IP 65)
• Each GAUGE carries a calibration certificate giving actual values

MS-DIAL was launched as a universal program for untargeted metabolomics that supports multiple instruments (GC/MS, GC/MS/MS, LC/MS, and LC/MS/MS) and MS vendors (Agilent, Bruker, LECO, Sciex, Shimadzu, Thermo, and Waters). Common data formats such as netCDF (AIA) and mzML, can also be managed in our project.

Product Details:

Magnetic stand is designed for the efficent pull down of magnetic beads in 1.5 and 2ml centrifgue tubes. The powerful magnet pulls beads to the side of the tube, allowing for the removal of all the liquid supernatant with no contamination with beads.

Additional Information:

• Item Code: D83059000

Product Details:

Features:

• Every gauge carries a calibration certificate giving actual values
• Checks OD, ID, step and depth
• Robust, hardened and ground stainless steel jaws and beam
• Accuracy as per DIN 862
• Clear, easy to read graduated dial with adjustable bezel
• Shock Proof movement
• Supplied in a sleek plastic box

Technical Details:

Product Details:

A digital caliper is a precision instrument used to take very accurate measurements. The caliper is easy to use with a digital display. Most are able to measure up to 0.01 mm (0.0005 inches).

Product Details:

DescriptionA Mitutoyo dial snap gauge designed for quick GO/NG judgement of diameters of cylinders and shafts. Anvils are chamfered for easy workpiece insertion. The dial indicator is optional, enabling the user to choose from the wide range available to best suit the application.

Additional Information:

• Item Code: D89019000

Product Details:

DescriptionA Mitutoyo dial snap gauge designed for quick GO/NG judgement of diameters of cylinders and shafts. Anvils are chamfered for easy workpiece insertion. The dial indicator is optional, enabling the user to choose from the wide range available to best suit the application.

Additional Information:

• Item Code: D89039000

Product Details:

DescriptionA Mitutoyo dial snap gauge designed for quick GO/NG judgement of diameters of cylinders and shafts. Anvils are chamfered for easy workpiece insertion. The dial indicator is optional, enabling the user to choose from the wide range available to best suit the application.

Product Details:

DescriptionA Mitutoyo dial snap gauge designed for quick GO/NG judgement of diameters of cylinders and shafts. Anvils are chamfered for easy workpiece insertion. The dial indicator is optional, enabling the user to choose from the wide range available to best suit the application.

What is a comparator stand? The comparator stand is one of the most effective measuring equipment which is used for the comparison of multiple parameters in the industries. In these stands, users can make precision measurements of a workpiece by mounting a dial, digital Indicator or a probe.

Back plunger type dial gauges are suitable for mounting onto leveling machine tool tables or inspection jigs, and for use in small spaces where the graduations of standard dial gauges are difficult to see.

The device is equipped with a large digit for better viewing. Display resolution 0.01mm and 0.0005 inch, zero setting, with calibration certificate and preset reference table. Baker dial gauge digital plunger-type 0-25mm has manual on/off the power. The digital plunger is a good choice for accurate depth measurements.

The device is equipped with a large digit for better viewing. Display resolution 0.01mm and 0.0005 inch, zero setting, with calibration certificate and preset reference table. Baker dial gauge digital plunger-type 0-25mm has manual on/off the power. The digital plunger is a good choice for accurate depth measurements.

The device is equipped with a large digit for better viewing. Display resolution 0.01mm and 0.0005 inch, zero setting, with calibration certificate and preset reference table. Baker dial gauge digital plunger-type 0-25mm has manual on/off the power. The digital plunger is a good choice for accurate depth measurements.

The device is equipped with a large digit for better viewing. Display resolution 0.01mm and 0.0005 inch, zero setting, with calibration certificate and preset reference table. Baker dial gauge digital plunger-type 0-25mm has manual on/off the power. The digital plunger is a good choice for accurate depth measurements.

A micrometer is a tool that measures the size of a target by enclosing it. Some models are even able to perform measurements in units of 1 μm. Unlike hand calipers, micrometers adhere to Abbe's principle, which enables them to perform more accurate measurements.

Dial gauges are used for checking flatness of surfaces; parallelism of bar and rods; and detecting small differences if any in linear measurement of identical objects. A dial gauge is also used for measuring concentricity of round objects. These are available in inches as well as in millimetre.

A Lever Dial Gauge, commonly known as the Dial Test Indicator, is designed to probe surfaces that cannot be reached with a normal dial gauge. It is useful both for alignment and measurement purposes. A Lever Dial Gauge has a stem, dial face, bezel, pointer and stylus.

A Lever Dial Gauge, commonly known as the Dial Test Indicator, is designed to probe surfaces that cannot be reached with a normal dial gauge. It is useful both for alignment and measurement purposes. A Lever Dial Gauge has a stem, dial face, bezel, pointer and stylus.

A vernier calliper is defined as a measuring device that is used for the measurement of linear dimensions. It is also used for the measurement of diameters of round objects with the help of the measuring jaws.

A vernier calliper is defined as a measuring device that is used for the measurement of linear dimensions. It is also used for the measurement of diameters of round objects with the help of the measuring jaws.

A vernier calliper is defined as a measuring device that is used for the measurement of linear dimensions. It is also used for the measurement of diameters of round objects with the help of the measuring jaws.

A micrometer is a tool that measures the size of a target by enclosing it. Some models are even able to perform measurements in units of 1 μm. Unlike hand calipers, micrometers adhere to Abbe's principle, which enables them to perform more accurate measurements.

A micrometer is a tool that measures the size of a target by enclosing it. Some models are even able to perform measurements in units of 1 μm. Unlike hand calipers, micrometers adhere to Abbe's principle, which enables them to perform more accurate measurements.

A micrometer is a tool that measures the size of a target by enclosing it. Some models are even able to perform measurements in units of 1 μm. Unlike hand calipers, micrometers adhere to Abbe's principle, which enables them to perform more accurate measurements.

A micrometer is a tool that measures the size of a target by enclosing it. Some models are even able to perform measurements in units of 1 μm. Unlike hand calipers, micrometers adhere to Abbe's principle, which enables them to perform more accurate measurements.

A micrometer is a tool that measures the size of a target by enclosing it. Some models are even able to perform measurements in units of 1 μm. Unlike hand calipers, micrometers adhere to Abbe's principle, which enables them to perform more accurate measurements.