Electronic Gauge

Product Details:

• 8 character, LED type, 7 segment digital display shows measurements either in absolute or comparative form
• Exclusive 8-character alphanumeric dot-matrix type digital display for menu setting
• Two metric & two inch measuring ranges

Product Details:

• 101 segment, 3 colour LED bar-graph column type measurement display
• Column can be configured to originate from the centre or one end of scale
• 8-character alphanumeric dot-matrix digital type display shows measurements either in absolute or comparative form
• Exclusive 8 character alphanumeric dot-matrix digital type display for menu setting
• Five metric & five inch measuring ranges

Product Details:

• Up to 4 RS232 compatible Baker electronic measuring inputs can be interfaced to one 4 channel multiplexer
• PC can access RS232 data from the four Baker electronic measuring instruments through RS232 Output port of the 4 channel multiplexer
• Maximum distance between Baker multiplexer and PC is 2 meters, and that of Baker instrument to the multiplexer is 3 meters
• Data from each Baker instrument is tagged by an unique ID to prevent data loss, corruption or mixing

• By pressing data switch on digital instrument / digital read out unit
• By pressing a foot switch
• Calling command from PC to fetch data from the digital instrument / digital read out unit

Product Details:

• Dual scale 3-0-3 and 10-0-10 galvanometer with enclosed tolerance pointers
• 5 Metric and 5 Inch ranges
• FEATURES
• Twin channel gauge units with selectable probe combinations of +A, -A, +B, -B, +A +B, +A -B, -A +B, -A -B
• Inch and Metric measuring ranges
• RED, GREEN and YELLOW tolerance lamps for REJECT, ACCEPT and REWORK indications
• RS232 data output
• Comprehensive outputs for further processing
• Compatible with Half-bridge and LVDT type inductive measuring probes
• Sturdy, Ergonomic design, suitable for shop floor environment
• Splash proof and sealed against dust
• Add-on Modules available for various applications e.g. Light Grading Module, Relay Module, etc.
• Mains supply 220 volts AC

Product Details:

Product Details:

• 254 mm tall analogue red LED bar graph display with 100 segments
• Variable bar graph intensity selection
• 5 Metric and 5 Inch ranges

Product Details:

• Digitally driven, Analogue Galvanometer type measurement display
• Five Metric & Five Inch Measuring ranges
• State-of-the-art technology with host of features, a must for today's shop process quality engineering
• Two level password, prevents unauthorized alteration
• Multiple-level display intensity for operators comfort
• Inch & metric measuring ranges
• Static & dynamic measurement
• Permits incorporation of complex formulae for probe combination
• Display of tolerance and control limit status — supports process control
• Classifies tolerance band into uniform or non-uniform tailor made grades
• Permits menu entries up to 16 different settings for quick application changeover
• Wide range of process control based electrical outputs facilitates automation
• Auto calibration
• Compatible with half bridge and LVDT type inductive measuring probe
• RS232 based interface with real time tagged measurements
• Aesthetically appealing, sturdy and ergonomic design, suitable for shop-floor applications
• USB interface to PC and flash drive

Product Details:

• Eight measuring channels having pre-determined full-scale DC output voltage, based on a pre-determined measuring range
• Interfaced to eight Baker Inductive probes
• Recessed 'Zero' control per channel: Travel 50 to 60 pm
• Recessed calibration control per channel
• Max. permissible error (MPE) per channel is less than or equal to ±1 % of the full scale measuring range
• Reference temperature of calibration is 20 °C
• Drift of sensitivity over operating temperature range : < 0.5 % / °C
• Power consumed by module 20 VA (max)
• Operating temperature range 0 °C to 45 °C. Humidity should not exceed 60 % Rh (non-condensing)
• All measuring channels are compatible only to the Baker Axial probes
• Also available in 4 & 2 Channel (Probe inputs)

Product Details:

• RS232 compatible Baker electronic measuring instruments, each equipped with a Wireless Transmitter (WT), can be interfaced to a Wireless Receiver (WR) at PC end
• Small and compact wireless modules, easy to use
• License free operating frequency (2.4GHz), ISM (Industrial Scientific & Medical) frequency band
• RS232 interface
• Wireless communication up to 250Kbps
• In-built network security like: 128 bit AES (Advance Encryption Standard) Encryption, 16 bit customized Network ID
• Supports Mesh network topology
• Transmission range 100 meters, this depends on environment and clear line of sight
• Transmission range can be extended using active Baker instruments fitted with Wireless Transmitters or Wireless Repeaters (WRP)
• Very high receiver sensitivity and low power operation

• If clear line of sight, between antennas of WTs and WR is interrupted, then one or more WRPs will have to be introduced
• Number of WRPs that will be required for a networking project, cannot be ascertained at the beginning, and can be fully determined only during installation and commissioning

Product Details:

• Derives Taper or Included angle from known values of two diameters
• Unit of displayed angle : "Degree", "Minutes" & "Seconds"
• Extrapolates values of unmeasured diameters
• Shows tolerance status of measured or extrapolated values in form of lamps or icons
• Can be modified for special applications like ovality, length checking and clearance measurement as per customer requirement

Product Details:

• Accepts and displays RS232 based measurement data from Baker electronic instruments / gauges
• Tolerance status of measurement data is displayed in form of icons and lamps
• The acceptable measurement band can be graded into as many as 99 classes
• If required for the application, control outputs can be provided against tolerance or grade limits
• RS232 output tagged with tolerance and grade status can be sent to receiving PC

Product Details:

• Interfaces with 4 / 8 Baker Half-Bridge inductive probes
• The new Smart Probe module is equipped with probe signal conditioner as well as analog to digital conversion capability Therefore, now the computer does not have to be equipped with an ADC interface card, as required by the old probe module
• USB serial data communication between PC and Smart Probe module
• Digital measurement value is data tagged with input and output Digital status, which eliminates requirement of a separate input / output interface card in the PC. 6 Digital inputs and 12 digital outputs (TTL compatible)
• Compact size

• For applications requiring more than 8 probes, two or more smart probe modules of appropriate input capability may be used

Product Details: